Omron CX-INTEGRATOR - V1.1 Operation Manual page 61

Network Configuration Window
Pop-up Menu for Components
PLCs
Pop-up menu
Parameter Edit
Load
Save
Compare and Change Unit
Version
Display Error Log
Status/Error of
Communication Unit
Error Log of
Communication Unit
Connect to this PLC
Toggle Position
Copy
Paste
Delete
Edit Name
Edit Node Address
Start Special Start with
Application Settings
Inherited
Start Only
Description
Edits the selected PLC's parameters.
Reads the selected PLC's parameters from
a file.
Saves the selected PLC's parameters.
Compares the unit version of the actual
component (Unit) with the unit version
supported by the software on the computer.
Also changes the unit version of the
component on the computer to match the
unit version of the actual component (Unit).
Displays present CPU Unit errors and the
CPU Unit error log online.
Displays a Communications Unit's status
and error information online.
Displays a Communications Unit's error log
online.
Switches to the selected PLC as the target
PLC so it is possible to access that PLC.
Allows the network configuration to be read.
Moves a component's icon above or below
the network line.
Copies the selected PLC.
Pastes the selected PLC in the network.
Deletes the selected PLC.
Changes the selected PLC's name.
Edits the selected PLC's node address.
Starts the associated application while
keeping the PLC model settings.
Starts the associated application
(CX-Programmer for a PLC).
1-6 Menus
1-6-2 Pop-up Menus
Offline Online
OK No
OK No
OK OK
No OK
No OK
No OK
No OK
No OK
OK No
OK No
OK No
OK No
OK No
OK No
OK OK
OK OK
1-41