Servicing
Image 17–6 Lamp side cover
17.5 Removal of the lamp house
WARNING: Switch off the projector and unplug the power cord before starting the procedure.
WARNING: The Lamp House is very hot after operation. Let the projector cool down for at least 15
minutes before proceeding to the next step. Failure to do so can cause serious injury.
Required tools
Flat screwdriver
How to remove
1.
Remove the lamp cover on the input side, see
2.
Release the 3 spring lock screws.
206
R5906070 /16
HDX 4K
1
1
"Removal of the lamp
cover",
page
205.