Advanced Settings - Color - Barco HDX-4K20 FLEX User Manual

GUI – System Settings
Image 14–60 Example of the Remote access menu
2. Enable the slider to enable the Camera preview feature.
Image 14–61 Remote access menu, Camera preview is enabled
14.18.3 Advanced Settings – Color
CAUTION: The native colors have been measured and set during factory production. Do not
change them, unless parts of the optical path have been replaced due to servicing.
If you need to change the native colors on the device, make sure to also perform a P7 calibration,
using the Projector Toolset and a chroma meter. For more info on P7 calibration, refer to the
Projector Toolset Reference guide.
How to adjust the P7 native settings
1. In the main menu, navigate to Settings → Maintenance → Advanced, while using the service code to enter
the menu.
Image 14–62 Maintenance menu, Advanced
2. In the Advanced Settings menu, select Native RealColor.
Image 14–63 Advanced Settings, Native Realcolor
188 R5906070 /16 HDX 4K