Remove And Clear Metal Front Filter - Barco HDX-4K20 FLEX User Manual

Required parts
New filter (available kit : R98010085, contains 5 high density filters and one cleanable filter)
How to replace
1. Remove the front cover, see
2. Push both filter holders to the outside.
Image 17–10 Filter replacement
3. Take out the filter and insert a new one.
CAUTION: Never clean the filter. Always replace with a new one.

17.8 Remove and clear metal front filter

WARNING: Switch off the projector and unplug the power cord before starting the procedure.
Required parts
New filter when needed (available kit : R98010085, contains 5 HEPA filters and one cleanable filter)
How to remove
1. Remove the front cover, see
2. Release the thumb screw (1)
3. Pull the bottom holder to the front.
"Removal of the front cover",
"Removal of the front cover",
page 202.
page 202.
R5906070 /16
Servicing
HDX 4K 209