GUI – Installation
•
Auto front: The projector detects itself if it is ceiling or table mounted and projects always a readable
image.
•
Auto rear: The projector detects itself if it is ceiling or table mounted and projects always a readable image.
How to set the correct orientation
1.
In the main menu, select Installation → Orientation.
Image 12–17 Installation menu, orientation
The Orientation menu is displayed.
Image 12–18 Example of the orientation menu
2.
Use the ◄ or ► keys to select the projector orientation mode and press OK to activate.
12.9 Scaling modes
About scaling modes
While the default mode of projection is to fill the screen while respecting the aspect ratio (fill aspect), it is also
possible to stretch the image in a different way. You can choose from one of the following scaling methods:
124
R5906070 /16
HDX 4K