Pulse Quad Dp 1.2 Input - Barco HDX-4K20 FLEX User Manual

• The SEL LED lit up GREEN when the input is selected.
For specifications about the supported inputs for SDI, HDMI, HDBaseT and DisplayPort 1.2 see
chapter "Video timing tables", page
Remark concerning the Mk I and Mk II inputs boards
The Mk I input board miss functionality that has been implemented on the Mk II input board. These missing
features include:
• Loop-through functionality
• 12G SDI support
• Network connectivity on HDBaseT inputs
The projector is now standard equipped with the Mk I input board. For details and specifications see chapter
"Pulse Quad Combo input Mk II", page
Visual difference between the Mk I and Mk II input boards
There is one real visual aid to tell the two variants apart. There are visual markings added on the Mk II input
board, marking which connector supports 12G and which only supports 3G.
SDI IN
SEL
SYNC
1
A B
Image 6–7 Quad Combo Input Mk I board, without markings above
the SDI inputs
SDI IN
3G/12G SEL 3G
SYNC
2
A B
Image 6–8 Quad Combo Input Mk II board, with 3G/12G markings
above the SDI inputs/outputs.

6.6 Pulse Quad DP 1.2 input

Quad DP 1.2 input
SEL
DP A
SYNC
1
Image 6–9
1 Quad DisplayPort channel A input
2 Quad DisplayPort channel B input
3 Quad DisplayPort channel C input
4 Quad DisplayPort channel D input
LED behavior
• The SYNC LED lit up ORANGE when valid input sync is detected.
• The SEL LED lit up GREEN when the input is selected.
233.
67.
SDI IN/OUT
SEL SEL SEL
SYNC
SYNC SYNC
C
D
SDI IN/OUT
SEL 3G SEL 3G SEL
SYNC SYNC SYNC
C D
SEL
DP B SYNC
2
Input & Communication
SEL
DP C DP D
SYNC
3 4
R5906070 /16
SEL
SYNC
HDX 4K 69