Removal Of The Lamp House - Barco HDF W22 User And Installation Manual

17. Servicing

17.6 Removal of the lamp house

W
ARNING
C
AUTION
Due to its high internal pressure, the lamp may explode in either hot or cold states if improperly handled.
Necessary tools
7 mm flat screw driver.
How to remove the lamp house
1. Switch off the projector and unplug the power cord at the projector side.
2. Remove the lamp cover, see "Removal of the light unit cover", page 394.
3. Release the three spring lock screws of the lamp house as illustrated.
Image 17-10
Unlock lamp house
4. Clasp the lamp house by the handles and pull the lamp house out of the projector.
Image 17-11
Lamp house removal
408
:
This procedure may only be performed by qualified technical service personnel.
:
Never attempt to disassemble the lamp from its housing or to dispose of it. Return it to Barco.
R5905158 HDF SERIES 08/12/2016