Power On Projector - Barco HDX-4K20 FLEX User Manual

Getting Started

8.1 Power on projector

How to power on.
1. Press the mains switch at the back of the projector to switch on this projector.
Image 8–1 Main switch
• When '0' is pressed, the projector is switched off.
• When 'I' is pressed, the projector is switched on.
The projector starts up to standby mode. The Power on/off button will blink until standby mode is
achieved. Once in standby mode, the Power on/off button will be lit WHITE, but the display will be off.
2. Press the Power on/off button on the projector, or the Power On button on the remote control.
The projector will continue to power on mode. The Power on/off button will blink until the projector is
ready. Once the projector is ready, the Power button will be lit BLUE.
The start up screen is displayed on the touch panel and when fully started up, it changes to the overview
screen.
1
2
Image 8–2
The current mains input voltage is indicated on the voltmeter just above the power switch.
The background image of the startup screen and info screens can be changed with Projector
Toolset with an installed Pulseplug-in.
Status overview
Once the projector is started, press Status to get an overview of parameters such as :
• Chosen source
86 R5906070 /16 HDX 4K