15. Servicing
Image 15-6
Lamp side cover
15.5 Removal of the lamp house
W
ARNING
W
ARNING
before proceeding to the next step. Failure to do so can cause serious injury.
Necessary tools
Flat screwdriver
How to remove
1. Remove the lamp cover on the input side, see "Removal of the lamp cover", page 138.
2. Release the 3 spring lock screws.
140
:
Switch off the projector and unplug the power cord before starting the procedure.
:
The Lamp House is very hot after operation. Let the projector cool down for at least 15 minutes
1
1
R5906070 HDX 4K 07/11/2017