Setting The Desired Gamma Type - Barco HDX-4K20 FLEX User Manual

Image 11–10 Image menu – Gamma
2. Use the ▼ key to select the slider.
3. Use the ◄ or ► key to change the gamma value between 1.0 and 2.8 . The default value is 2,2.
Tip: The slider can be adjusted with a precision of 0.1.
Image 11–11 Example of the gamma menu

11.4 Setting the desired Gamma type

Exception when using an HDR source
The only alternate color gamma that can not be selected in this menu is PQ/HDR. Because the color output of
HDR is dependant on extra factors such as screen luminance, a separate menu has been made available for
this (PQ).
If the source signal is HDR encoded an HDR icon will be visible next to the source signal. This is visible both in
the Source selection menu, as well as the status menu.
Image 11–12 Example of the HDR icon on the status menu
For more info on PQ and HDR, refer to "Displaying HDR content", page
GUI – Image
114.
R5906070 /16 HDX 4K 109