Ir Control; Broadcast Address - Barco HDX-4K20 FLEX User Manual

GUI – System Settings
Image 14–13 Example of the available networks list.
10. Press Connect to connect to the selected network.
11. If required by the chosen wireless network, fill in the username and password and confirm.
When connected to this network, it is indicated in the upper right corner of the menu with the term
"connected".

14.2 IR control

14.2.1 Broadcast address

About broadcast address
Broadcast address is a common address that can be set on the projector. That can be "0" or "1". The default
broadcast address is '0'.
Any command coming from an RCU programmed with that common address will be executed.
How to the broadcast address
1. In the main menu, select Settings → Communication → IR Control.
Image 14–14 Communication menu, IR control
The IR control menu is displayed.
166 R5906070 /16 HDX 4K