Lens Features - Barco HDX-4K20 FLEX User Manual

Image 14–36 Example of the power settings menu
2. To change the time the projector turns the light source off, select the desired Power off time-out.
3. To change the time the projector goes to stand-by mode, select the desired Standby time-out.
How to disable/enable auto off mode
1. In the main menu, select Settings.
2. In the System settings menu, choose to either enable or disable ready mode by using the Auto off slider.
While Ready mode is available, the slider is colored blue.
Image 14–37 Settings menu, enable auto off slider
How to disable/enable standby mode
1. In the main menu, select Settings.
2. In the System Settings menu, choose to either enable or disable standby mode by using the Standby
mode slider. While standby mode is available, the slider is colored blue.
Image 14–38 Settings menu, enable standby mode

14.12 Lens features

What can be done?
Some lens features can be disabled once they are correctly aligned so that a misalignment during a show is
not possible.
How to enable/disable
1. In the main menu, select System Settings → Lens Features.
GUI – System Settings
R5906070 /16 HDX 4K 177