Optional Stand/Riser
An optional stand / riser is available for the scanner. The stand and riser
have anti-skid pads on the bottom and can rest on any desired
horizontal surface or countertop. The scanner (along with the stand/
riser) can be easily repositioned on the counter or lifted for portable
use.
Removing the Stand/Bottom Cover
CAUTION
1.
Unplug the Power Interface Cable by inserting a paper clip or
similar object into the latch release hole as shown in
page
2.
2.
After removing the Interface Cable, pull the bottom of the Stand
forward (in the direction of the Front Window) to detach it from
the unit. It will snap free easily if oriented correctly.
Front Window
Magnetic Base Mounting
The magnetic swivel base can be used to semi-permanently attach a
scanner to a flat surface (vertical or horizontal), using the provided
adhesive or screw. Both the stand and riser options mount onto the
4
MAGELLAN™ 1500I
Do not attempt to remove the Stand without first
unplugging the Cable as described. Doing so may
result in damage to the scanner.
Stand
Figure 2 on