ENTER/EXIT PROGRAMMING MODE
Several options are available to configure beeper behavior for RF operation.
Good Transmission Beep
Enables/disables the Good Transmission Beep indication. When enabled, a beep occurs
when a Label is correctly transmitted to the base.
$CBTAB00
Good Transmission Beep = Enable
Beeper Frequency
Adjusts radio-specific beep indications to sound at a low, medium or high frequency,
selectable from the list below (controls the beeper's pitch/tone).
$CBTBF00
Beep Frequency = Medium
$CBTBF02
242
GRYPHON™ I GD/GBT/GM4500
WIRELESS BEEPER FEATURES
WIRELESS FEATURES
Good Transmission Beep = Disable
$CBTAB01
Beep Frequency = Low
$CBTBF01
Beep Frequency = High