Table of Contents
Advertisement
2-2-2 Rotor Chamber
2-2-2 Rotor Chamber
The structure of the rotor chamber (vacuum chamber) is shown in Fig. 2-2-2.
Drive shaft (crown)
Speed sensor
Overspeed detector
(detecting any instance
exceeding the maximum
allowable speed of the rotor)
Protective steeling ring
Note：If sample or water drops to the window of the temperature sensor or the RLM sensor, it may cause an
incorrect detection. Whenever the sensor is wet, wipe it with a clean, dry cloth. Take care not to
scratch the surface of the sensor.
Bowl (Rotor Chamber)
Chamber door seal
Thermoelectric cooling element
(cooling the rotor)
Fig. 2-2-2 Rotor chamber
Handle
Magnetic head for rotor life management (RLM)
sensor (reading and writing information on the life
of the rotor with RLM adapter)
※
RLM：Rotor Life Managemennt
2-6
Temperature sensor (measuring
the temperature of the rotor)
Chamber door
Door lock system
Vacuum chamber
Advertisement
Table of Contents
