Hitachi CP100NX Instruction Manual page 124

3-4-6 Admin Function
(3) Procedure for deleting a registered rotor
Step Touchscreen operation
1 Press the Rotor management
button, select the rotor to
delete and press the [MENU]
button.
2 Press the [Delete Rotor]
button in the menu box.
3 Press the [YES] button in the
delete confirmation box.
4 Press the Run screen tab to
return to the Run screen.
NOTE
1) Undefined 1 is the default selection that is automatically made when a rotor is installed without
selecting Undefined 2 or another rotor from the rotor list. It records the run history of all rotors
that are installed in the same way.
2) Select Undefined 2 rotor for a specific rotor with an optical disk whose run history you want to
record without registering it.
3) Undefined 1 rotor and undefined 2 rotor cannot be deleted.
Screen displays and notes
The display again shows the Run screen.

3-97
● The MENU box
appears in the Rotor
management screen.
[MENU] button
● A delete confirmation
message appears.
The selected rotor is
●
deleted from the
Rotor management
screen.