Hitachi CP100NX Instruction Manual page 66

3-3-1-2 Programmed Operation Procedures
(2) If the registered program no. is not known
Step Touchscreen operation
1 Turn on the centrifuge
POWER switch.
Press the [PROGRAM]
2
button in the Function
Selection Area.
3 Press the [Folder] button in
the Program display screen.
4 a) If the color or design of the
registered folder is known,
press the button with that
color (or design).
b) If the color or design of the
registered folder is not
known, press the [ALL]
button.
5 a) If the [Folder] button
indication makes clear
which program folder you
want to call, press that
[Folder] button. Check that
the periphery of the folder
turns blue and press the
[Select] button.
Screen displays and notes
The Run screen appears.
Pressing a color (or design) button will display only the

program registered to that color (design).
 Pressing the [ALL] button will display all folders regardless
of their color (or design) in order.
Use the [<<], [<], [>] and [>>] buttons to turn pages.

A run parameter called from the program
3-39
The Function
●
Selection Area
changes to the
Program display
screen.
Program display
[Folder] button
The Run screen
●
replaces the
Program list screen.
[ALL] button
Differently colored
folder buttons
[MENU] button
● The display again
shows the Run screen.
A run parameter called
from the program
Program display screen