Run Time Indication; Actual Run Timer - Hitachi CP100NX Instruction Manual

(4) Run time indication

Select either the elapsed time or remaining time as run time.
Note that when the run time setting is set to [HOLD], elapsed time is automatically
selected.
1) [Elapsed] button:
Elapsed time is displayed in the centrifuge run time
indication field in the Run screen and "Lapse" is indicated
to the right above the display field.
2) [Remaining] button:
Remaining time is displayed in the centrifuge run time
indication field in the Run screen and "Remain" is indicated
to the right above the display field.
Press to select either the [Elapsed] or the [Remaining]. Confirm that the selected button is
surrounded by a red frame before pressing the [X] button or ADMIN tab to store the setting.

(5) Actual run timer

You can set the run time to start counting down either when the [START] button is
pressed or when the set speed is obtained.
1) [Enable] button: Run time is counted down when the set
2) [Disable] button: Run time is counted down right after the
Press to select either the [Enable] or the [Disable]. Confirm
that the selected button is surrounded by a red frame before
pressing the [X] button or ADMIN tab to store the setting.
speed is obtained.
[START] button is pressed.
Fig. 3-4-6 (5) Actual run timer setting screen
3-98
3-4-6 Admin Function
Fig. 3-4-6 (4) Set run time
indication screen