(2) User lockout
User lockout when enabled, makes it possible to control user access at three different
levels.
1) Method for setting user lockout
Step
Touchscreen operation
1
Log in as a user as described
in Section 3-2-4 "Logging in
as a User."
2
Press the [User Lockout]
button.
3
Press the [Enable] button.
Press the [Disable] button.
4
Press the [YES] button.
2) Method for enabling user lockout
Press the USER area in the Run screen as described in Section 3-2-4 "Logging in as a User" and
select a registered user. Further operation is not possible without logging in as a user.
User access level determines what operations are permitted.
Screen displays and notes
The user that logs in must have [Administrator] privileges.
The selected button is shown inside a red frame (in the
example, Disable is selected).
This dialog box does not appear when lockout is changed
from enable to disable. The [Disable] button is surrounded
by a red frame and user lockout is disabled.
The [Enable] button is surrounded by a red frame and user
lockout is enabled.
Press the ADMIN tab or the [X] button to return to the ADMIN
screen.
3-90
3-4-6 Admin Function
●
The Set user lockout
screen appears.
A dialog box for
●
enabling user lockout
appears.