Hitachi CP100NX Instruction Manual page 82

3-3-4 RTC (Real Time Control) Operation
Step Touchscreen operation
1 Set run parameters
according to the instructions
in Section 3-2-1 Setting run
parameters.
2 Press the [RTC] button in the
Function Selection Area in
the Run screen.
3 Press the RTC display screen
field.
Screen displays and notes
 When setting run parameters, do not set HOLD but enter a
numeric value for the run time (separation time).
[Start Time] button
The
 current date and time is displayed, the month is
displayed in blue and the unit is ready to accept entries.
3-55
The setting value is
●
displayed in the
setting value
display
field.
Setting value
display field
[RTC] button
● The setting value
is displayed in the
setting value
display field.
RTC display
The RTC setting
●
screen appears.
[Stop Time] button