Installing The Sd Card (Option) - Kyocera TASKalfa 266ci Service Manual

1-2-4 Installing the SD card (option)

<Procedure>
1. Turn off the main power switch.
Caution: Do not insert or remove SD
card while machine power is on.
Doing so may cause damage to the
machine and the SD card.
2. Remove the IF cover.
(see page 1-5-3)
3. Remove two screws and then remove
the option interface slot cover.
4. Install the SD card into the option inter-
face slot.
5. Refit the option interface slot cover by
two screws.
6. Refit the IF cover.
SD card slot
SD card
Option interface
slot cover
Figure 1-2-22
1-2-13
2PZ
Pin
Pin