Kyocera TASKalfa 266ci Service Manual page 128

Service items
Developer Entering initial value for replacing the developing unit
Setting
Description
After replacing the developing unit, enter the initial value (6-digit data) assigned on a
label attached to the package or developing unit.
Purpose
To set the initial value after replacing the developing unit.
Method
1. Enter the Service Setting menu.
2. Select [DeveloperSetting].
3. Press the start key.
4. Press the start key. The initial value is set.
Completion
Press the stop key.
Enter the initial value (6-digit data) using the numeric keys.
Developing unit
Description
DV560Y
Figure 1-3-21
1-3-90
Label
Package
2PZ