Kyocera TASKalfa 266ci Service Manual page 197

8. Release four hooks (hook A → B→ C).
Slide the right cover forward and then
remove it.
9. Remove the waste toner cover.
*: Check if four hooks (Hook A, B and C)
surely are secured to the main unit after
the right cover is reattached.
Especially, the bending part of the left
frame of the main unit should be inserted
into the groove of the Hook B.
Hooks C
Waste toner
cover
Hook B
Bending part
1-5-8
Hook B
Right cover
Figure 1-5-12
Hook B
of the flame
Figure 1-5-13
2PZ-3
Hook A