Kyocera TASKalfa 266ci Service Manual page 139

Code
Eject sensor stay jam
4211
4212
4213
4218
4219
Eject sensor remaining jam
4220
No original feed
9000
An original jam in the original
9001
conveying section
An original jam in the original
9003
switchback section 1
An original jam in the original
9004
switchback section 2
DP top cover open
9011
An original jam in the original
9401
conveying section
*: Refer to figure 1-4-2 for paper jam location (see page 1-4-1).
Contents
The eject sensor (ES) does not turn off during
paper feed from cassette.
The eject sensor (ES) does not turn off during
paper feed from paper feeder 1.
The eject sensor (ES) does not turn off during
paper feed from paper feeder 2.
The eject sensor (ES) does not turn off during
paper feed from duplex section.
The eject sensor (ES) does not turn off during
paper feed from MP tray.
The eject sensor (ES) is turned on when the power
is turned on.
The DP timing sensor (DPTS) does not turn on
within specified time during the first sheet feeding
(Retry 5 times).
DP timing sensor (DPTS) turns off within the speci-
fied time since the sensor turns on.
During duplex switchback scanning, the DP timing
sensor (DPTS) does not turn off within specified
time.
During duplex switchback scanning, the DP timing
sensor (DPTS) does not turn on within specified
time since original switchback operation starts.
The DP or DP top cover is opened during original
feeding.
The DP timing sensor (DPTS) does not turn off
within specified time of the DP timing sensor
(DPTS) turning on.
Conditions
1-4-4
2PZ
Jam
location*
D
D
D
D
D
D
H
H
H
H
H
H