Table of Contents
Advertisement
S
YSTEM COMPONENTS
C
4
I
HAPTER
NSTALLATION
Installation
This Chapter tells you how the SMB Controller can be installed and the conditions to be observed. It also
includes the mounting into a 19" rack, the correct way to connect the earthing, and the power supply.
Other topics described in this chapter comprise fitting with system modules, interface cards and the rele-
vant wiring adapters. Finally the chapter also describes the network and terminal-side connection of the
interfaces and the installation, powering and connection of system terminals.
System components
The figure below shows the components of the Mitel SMB Controller complete with mounting options.
Figure 4.1:
System components with mounting options
Fitting the communication server
The communication server is suitable for both wall and desktop installation as well as for mounting in a
19" rack. Different mounting sets are available in each case.
89
Advertisement
Table of Contents
