Table of Contents
Advertisement
C
6
HAPTER
Event types
Event messages have a certain severity level: Normal (blue), Serious (yellow) and Critical (red). Many
event messages have both a negative impact (error occurred) and a positive impact (error corrected).
Some event messages have no impact and, thus, no match. Severity level, positive or negative impact (if
any) and the information, if there is a match or not, are indicated in the event table.
If an SRM server is indicated as signal destination, the event message severity level results in a change
of system status. This can be seen in the SRM agent and is displayed with the corresponding colour (see
also section SRM destination).
Table
6.12:Event types, in alphabetical order (Sheet 1 of 25)
Event message
ATAS: Connection
established
ATAS: Connection lost
Card in service
Trigger condition
ATAS: connection (re) established
ATAS: connection lost
A card that was previously out of
service is back in service again.
O
PERATIONS SUPERVISION
O
PERATION AND
Severity
1
Details
Date, time
critical (positive,
with match)
Cause (0:
critical (negative,
Logoff, 1:
with match)
missing cycle
signal), date,
time
Number of the
critical (positive,
expansion slot,
with match)
date, time
M
AINTENANCE
208
Advertisement
Table of Contents
