Table of Contents
Advertisement
C
4
HAPTER
Figure 4.6:
Rack-mounting procedure
Materials required:
•
Rack-mounting kit
•
Screw set for wall/desktop installation
•
Screwdriver
To rack-mount a communication server proceed as follows:
Pull off the screw covers on the left and right of the front panel.
1.
Secure the mounting plates to the communication server using the M4 screws. Make sure the front
2.
panel and the mounting plate are aligned.
Shut down the communication server (see
3.
supply.
: Be sure to observe the
CAUTION
Remove the housing cover.
4.
Connect the earthing (see
5.
Fit the housing cover.
6.
Placing two communication servers above each other inside a 19" rack
Shut-down
Safety
regulations.
Connecting the earthing
F
ITTING THE COMMUNICATION SERVER
mode) and disconnect it from the power
wire).
I
NSTALLATION
97
Advertisement
Table of Contents
