System Capacity - Mitel SMB Controller System Manual

C 3
HAPTER
Table 3.13:Wiring adapter (Continued) (Sheet 2 of 2)
WA-TS0
WA-TS1
1
WA-2W
WA-1PRI
2
WA-8DSI
1. Must not be used in USA/Canada.
2. Not yet supported with Release 6.0
The assignment to the RJ45 sockets depending on the wiring adapters is shown in
adapters / interface cards.

System capacity

System capacities are defined on the one hand by the existing hardware with its expansion possibilities
and on the other by the limits set in the software. The software limits can be partly expandable by licences.
TIC-4TS, TIC-2TS
TIC-4TS, TIC-2TS
a a
TIC-4AB , TIC-2AB ,
EADP4
a
TIC-1PRI
b
8DSI
E
XPANSION
Included in the equipment
supplied with the interface cards
must be ordered separately
Included in the equipment
b
ETAB4,
supplied with the interface cards.
Included in the equipment
supplied with the interface card
Included in the equipment
supplied with the interface card
S
YSTEM CAPACITY
S S C
TAGES AND YSTEM APACITY
Combinations of wiring
57