Wiring Adapter - Mitel SMB Controller System Manual

Mivoice office 400
Hide thumbs Also See for SMB Controller:
Table of Contents

Advertisement

C
3
HAPTER
Table
3.12:Trunk cards (Continued) (Sheet 2 of 2)
TIC-1PRI
TIC-4TS
TIC-2TS
1
TIC-4AB
a
TIC-2AB
1. Card with hardware version >= "1A" only. Card must not be used in USA/Canada.
: Do not use other interface cards or interface cards with older hardware versions than listed in
CAUTION
the table above. The interface cards or even the communication server could be damaged.

Wiring adapter

The wiring adapters route the interfaces of the various interface cards with the right connection diagram
to the RJ45 sockets on the front panel. The adapters are fitted to WA1...WA4 sockets.
WA-8DSI not yet supported with Release 6.0.
There are different types of wiring adapters, of which two (WA-TS0 and WA-TS1) have different plug-in
orientations. This determines the ratio of BRI-S interfaces to BRI-T interfaces.
: A configuration with wiring adapter is mandatory. An incorrect or missing configuration generates
NOTE
the corresponding error display on the LED display (F1...F4).
Table
3.13:Wiring adapter (Sheet 1 of 2)
Type
1 PRI-E1
3 BRI-S/T + 1 BRI-T
2 BRI-S/T
4 FXO
2 FXO
Figure 3.5:
Use with...
4
4
4
2
4
Types of wiring adapters
E
XPANSION WITH CARDS AND MODULES
E
S
XPANSION
TAGES AND
Contains 30 B channels
10 B channels can be used
licence-free
Not usable in USA/Canada for the
public network
Three BRI-T interfaces configu-
rable to BRI-S
One fixed BRI-T interface
Both BRI-T interfaces configu-
rable to BRI-S
Remarks
S
C
YSTEM
APACITY
56

Advertisement

Table of Contents
loading

Table of Contents