Terminal And Network Interfaces - Mitel SMB Controller System Manual

C 3
HAPTER
Table 3.16:Maximum number of terminals per system and interface (Continued) (Sheet 5 of 5)
FXS Analogue, nationally
approved terminals
•
•
•
•
•
•
•
FXS External equipment can be
switched via control outputs
FXS External switches for
controlling internal switch
groups via control inputs
FXS General bell
1. 4 interface cards 8DSI required (not yet supported with Release 6.0)
2. Maximum 64 radio units per location area if 4 location areas are defined, or maximum 128 radio units per loca-
tion area if 2 location areas are defined.
3. Operation on 2 DSI interfaces in each case
4. Refer CloudLink Gateway document
5. Maximum of 2 simultaneous call connections.
6. Transmission with the T.38 protocol is recommended for Fax over IP. The corresponding media resources need
to be allocated.

Terminal and network interfaces

Table 3.17:Terminal and network interfaces (Sheet 1 of 2)
Max. number...
Ethernet interfaces
Network interfaces, total
(FXO, BRI-T, PRI, BRI-S ext.)
Terminal interfaces, total (DSI,
FXS, BRI-S)
Pulse dialling (PUL)
Frequency dialling
(DTMF)
Radio units for cordless
phones
Door intercoms with
DTMF control func-
tions
Group 3 fax machines
Answering machines
Modems
SMBC
1
4
16
22
22
6
1
22
1
E S
XPANSION TAGES AND
200
1
200
1 per node
AIN with SMBC as Master
per node
96
200
S
YSTEM CAPACITY
S C
YSTEM APACITY
67