Table of Contents
Advertisement
C
6
HAPTER
Table
6.8:Enter emergency mode (Continued) (Sheet 2 of 2)
[11]
[12]
[13]
[14]
Shut-down mode
If, for maintenance purposes, the SMB Controller should be disconnected from the power supply, it must
be shut down in a controlled manner. This means, the applications need some time to save their data and
to close. When the shut-down mode is reached, the SMB Controller will remain in this mode for 1.5
minutes before it starts up again automatically. During this period, the SMB Controller can be discon-
nected from the power supply without concerns.
: Never disconnect the SMB Controller from the power supply to trigger a restart. This can result in
NOTE
data losses and prevent a restart.
Combination pattern
Enter shut-down mode
Requirement:
is displayed in shut-down mode.
[17]
D
ISPLAY AND CONTROL PANEL
O
M
PERATION AND
AINTENANCE
~2s
Press
pilot
key to
start
emer-
gency
mode
~2s
Confir
matio
n
~60
Loadi
ng
SMB
Contr
oller
Emer-
gency
softw
are
SMB
Contr
oller
is in
emer
gency
mode
202
Advertisement
Table of Contents
