Table of Contents
Advertisement
C
5
HAPTER
minutes before the SMB Controller starts up again. All configuration data are preserved (see
mode).
:
NOTE
•
Never disconnect the communication server from the power supply to trigger a restart. This can
result in data losses and prevent a restart.
•
The restart is triggered immediately. All the active call and data connections are interrupted.
First start
A first start has the effect of resetting the MiVoice Office 400 communication server from scratch. The
system-specific data such as the system ID, system type, sales channel, licence file, and software gener-
ation are preserved.
:
NOTE
•
A first start deletes all the configuration data already stored and replaces it with the default values
of the sales channel. Therefore, back up your configuration data before a first start.
•
The first start is triggered immediately. All the active call and data connections are interrupted.
First start via WebAdmin
A first start via WebAdmin is triggered in the maintenance settings with the First start button in the System
reset ( =4e) view.
First start via front panel
A first start via front panel is done using the pilot key (see
First start and reset sales channel via WebAdmin
With the First start and reset sales channel button in the maintenance settings of the WebAdmin System
reset ( =4e) view, you have the possibility not only to execute a first start but also to delete the sales
channel. During the next start, you will be prompted for the sales channel and licence file. Note that the
licence file is dependent on the sales channel. This means you can no longer use the existing licence file,
if you choose another sales channel.
: This function is only accessible for Administrators in Expert mode.
NOTE
Factory Reset
A factory reset of the SMB Controller is triggered in the SMB Controller Manager maintenance settings
with the Factory reset button in the System reset view.
:
NOTE
•
A factory reset deletes all loaded or installed applications (inclusive the MiVoice Office 400 applica-
tion) and their configuration data from the SMB Controller. The LAN settings will be changed to
DHCP. The password of SMB Controller Manager will be restored to default value.
•
The factory reset is triggered immediately. All the active call and data connections are interrupted.
W
EB
Carry out a first start of MiVoice Office
A
C
N
DMIN
ONFIGURATION
C
ONFIGURATION
Shut-down
400).
OTES
177
Advertisement
Table of Contents
