Table of Contents
Advertisement
C
6
HAPTER
Table
6.14:Example of event table
Event type
Total synchronization loss
In this example an event message is sent to the message destinations if there is a Total synchronization
loss event message when the system generates the event message 10 times within 1 hour.
Signal destinations
After a first start, all event tables are exactly assigned to a message destination. (Exception: Local desti-
nation and SNMP destination use this event table.) You can assign event tables to several or no message
destinations
The destinations are configured in the Message destinations (
Signal destination system phone 1 and 2
Event messages are sent to all system phones with display and entered in the corresponding message
group.
•
Destination system phone 1:
–
By default allocated to event table 1, which is preconfigured for common use.
–
Fix allocated to message group 16.
•
Destination system phone 2:
–
By default allocated to event table 8, which is preconfigured for front desk terminals in hospi-
tality environments.
–
Fix allocated to message group 15.
External signal destinations
Depending on the event table allocated, event messages (normally Table 2) are sent to a specified
external signal destination. Two external signal destinations can be specified:
•
1 primary external signal destination
•
1 alternative external signal destination
If the system issues an event message, the event message opens a PPP communication channel from
the public network of the communication server to a terminal adapter or modem. Once the event message
has been confirmed, the system clears down the PPP connection.
Signalling an event message to an external signal destination
Frequency
10
O
PERATIONS SUPERVISION
O
PERATION AND
Time period
1
=h1) view.
M
AINTENANCE
235
Advertisement
Table of Contents
