Table of Contents
Advertisement
C
6
HAPTER
Table
6.7:Normal mode with additional information (Continued) (Sheet 2 of 2)
[9]
Emergency mode
Whenever a standard software upload of the SMB Controller system software via the SMB Controller
Manager is not possible or has proved faulty, you must carry out an emergency upload. For this purpose
the SMB Controller must be set into the emergency mode.
In emergency mode pattern
Enter emergency mode
Restart the SMB Controller with the Restart button in the SMB Controller Manager System reset
1.
view.
–
All applications are closed and the SMB Controller starts up again
OR
Shut-down the SMB Controller with a long click (> 5s) of the pilot key (CTRL)
–
All applications are closed and SMB Controller changes into the shut-down mode and stays
there for 1.5 minutes before it starts up again.
Press the pilot key (CTRL) while F0 lights up red during start up (pattern [11]).
2.
–
As confirmation the F0 - F6 LED are rapidly flashing red 4 times (pattern
–
The SMB Controller Emergency software is loaded (pattern [13]).
–
The emergency mode is entered and Pattern
Table
6.8:Enter emergency mode (Sheet 1 of 2)
No.
PWR
F0
[10]
[14]
is displayed.
F1
F2
F3
is displayed.
[14]
F4
F5
F6
D
ISPLAY AND CONTROL PANEL
O
M
PERATION AND
AINTENANCE
Norma
l
mode,
an
error
occurr
ed.
[12]
).
SYS
Durat
Mean
ion
ing
~11s
Powe
r is
on,
begin
of
restar
t
201
Advertisement
Table of Contents
