WIRING GUIDELINES
These guidelines apply for any cable, supplied or not, used with an EX
controller.
•
Always use straight through cables.
•
Cables must not pull or create a lateral stress on the connectors; that
is, they must be long enough.
•
Cables must be installed in such a way not to present a trip hazard to
personnel working in the vicinity of the equipment.
•
Keep cables away from:
-
Sources of electrical noise such as radios, transmitters, and
broadband amplifiers
-
Power lines
-
Fluorescent lighting fixtures
-
Liquids or moisture
-
Heat sources
Requirements
5