Chapter 6: Load Select Modes - Tele Radio TG-T9-1 Installation Instructions Manual

Chapter 6: LOAD SELECT MODES

CHAPTER 6: LOAD SELECT MODES
MAKE A LOAD SELECTION
NOTE! Before starting to perform these settings, make sure that the stop relays are deactivated!
1. Make sure that the stop button is pressed.
2. Twist and pull out the stop button.
The top LED lights (green when the battery capacity is good, red when the battery capacity is poor).
3. Press the right start button. Keep pressed.
4. Press the stop button.
5. Release the right start button.
The top LED flashes (green when the battery capacity is good, red when the battery capacity is poor)
when in menu mode.
6. Press button 6.
7. To select Load selection, press a button according to the table:
Press...
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Left start button
to achieve Load select mode...
1
2
3
4
5
6
0
- 54 -