Settings For T70Rx-03Awb + T70Tx-06Ttb; Register The Transmitter In The Receiver; Winch Modes - Tele Radio T70 Series Installation Instructions Manual

SETTINGS FOR T70RX-03AWB + T70TX-06TTB

Register the transmitter in the receiver

To register the transmitter in the 1st receiver:
Press transmitter button 1 or 4 (see picture).
To register the transmitter in the 2nd receiver:
Press transmitter button 2 or 5 (see picture).
To register the transmitter in the 3rd receiver:
Press transmitter button 3 or 6 (see picture).

Winch modes

Winch mode I
Relay 1 activates when relay 2 or 3 activates (green Function LED= off).
Winch mode II
Relay 1 activates and stays on for 30 seconds when relay 2 or 3 is activated.
Switch between Winch mode I and Winch mode II
1. Start the receiver and transmitter.
Press the receiver Function button. When the Function LED lights green, Winch mode II is selected.
When the Function LED is off, Winch mode I is selected. To switch winch mode, press the Function
button until the Function LED lights or goes out.
- 15 -