Midi Receive Channel; Volume - Yamaha SY-35 Reference Manual

MULTI
Settings: Source: I, C, P
Bank: 1 ... 8
Number: 1 ... 8
Procedure: Press the [NUMBER/MULTI PART
SELECT] key corresponding to the desired
multi-play part.
4 6
Use the [ ] and [ ] cursor keys to move the cur-
sor to the source, bank, or number parameter.
Use the [–1/NO] and [+1/YES] keys to set the
selected parameter as necessary.
MU>MIDI Rcv.ch
channel= 1
Summary: Sets the MIDI receive channel for the
selected multi-play part to any channel between
1 and 16, or off.
Settings: 0 ... 16, off
Procedure: Press the [NUMBER/MULTI PART
SELECT] key corresponding to the desired
multi-play part.
MU>VOLUME
Level= 0
Summary: Adjusts the volume of the selected
multi-play part.
Settings: 0 ... 99
Procedure: Press the [NUMBER/MULTI PART
SELECT] key corresponding to the desired
multi-play part.
36

MIDI RECEIVE CHANNEL

VOLUME

Details: In this display the source, bank and number
parameters are shown in the standard SY35
voice number format. "P12," for example, is
preset bank 1, number 2; "I35" is internal bank
3, number 5, etc.
6
Use the [ ] cursor key to move the cursor to the
lower display line. The [–1/NO] and [+1/YES]
keys are used to select the desired MIDI channel
or turn MIDI reception for that part off.
Details: The most logical and easy-to-follow set-
tings for multi-play parts 1 through 8 are, natu-
rally, MIDI channels 1 through 8. Turn MIDI
reception "off" for parts you do not intend to
use.
6
Use the [ ] cursor key to move the cursor to the
lower display line. Use the [–1/NO]
[+1/YES] keys to select the desired volume level.
Details: A setting of "0" produces no sound while
a setting of "99" produces maximum volume.
The ability to independently adjust the volume
of each multi-play part makes it simple to set up
the optimum balance or "mix" between parts.
and