Table of Contents
Advertisement
Wire terminal of
Pin number of
VIP-3/SC/D25
Matrox GatorEye
SUB/F VARIOFACE
digital I/O and
module
power cable
connector (DB-25)
17
17
8,9
8,9
Matrox GatorEye
line name
CCS
PWR
This connection module can be purchased from the following source:
Manufacture:
Connector:
Part Number:
Description:
Description
Controlled-current output, designed to be connected to an
illuminator (0-500 mA, intensity controlled using an internal
pulse-train strobe line, generated with a pulse width
modulator (PMW) and exposure timer 2).
Note that when you use a 24 V power source for your Matrox
GatorEye, the CCS can output from 2.4 V to 21 V to your
illuminator. If, however, you use a 12 V power source, the CCS can
output from 2.4 V to 10 V to your illuminator.
If using PoE, this pin can not used.
Power provided to your Matrox GatorEye. The power must be
either +12 V or +24 V +/- 10%. The amount of power required is
determined by the power requirements of the devices attached to
your Matrox GatorEye (such as a ring LED).
Note that, if using PoE, this pin should not be connected.
Cable information
Phoenix Contact GmbH & Co. KG
VIP-3/SC/D25SUB/F
2315188
VARIOFACE module, with screw connection and female D-Subminiature
pin strip, for mounting on NS 35/7.5 or NS 32, 25-pos.
Connection modules
95
Advertisement
Table of Contents
