Table of Contents
Advertisement
• Dynamic IP address.
A dynamic IP address is an IP address that can change. If not using a DHCP server,
the Auto IP service of a DHCP client assigns a dynamic IP address that, by default,
might change each time your computer (and/or your Matrox GatorEye) reboots.
A DHCP server, if used, can assign an IP address to a computer for a fixed amount
of time. When that time expires, the DHCP server can assign a new IP address to
that computer.
• GigE Vision.
GigE Vision is a world-wide recognized interface standard used for
high-performance industrial cameras to facilitate high-speed video and data
control over a network. The Automated Imaging Association (AIA) administers
the standard.
• Illuminators.
Illuminators provide light so that an object or a surface can be captured by a
camera. Examples of common illuminators are ring LEDs and strobe lights.
• Inductive load devices.
Inductive load devices are devices that have inductive properties (inductive
reactance), such as a relay or a motor. Devices connected to an inductive load
device require a diode to protect them from over-voltage. Over-voltage typically
occurs when the the connected device disconnects.
• IP67 enclosure.
An IP67 enclosure is a specific type of industrial enclosure that is dust and
water-tight. The name is derived using the incarnation protection rating (or
ingress protection code), and defined in the international standard IEC 60529.
• Lighting controllers.
Lighting controllers control illuminators. A strobe light is typically controlled by
a lighting controller.
Glossary
57
Advertisement
Table of Contents
