Table of Contents
Advertisement
24 Chapter 2: Powering and connecting to your Matrox GatorEye
Reading the state of your Matrox GatorEye
From the moment you power up your Matrox GatorEye to the moment you power
it down, at least one of the four light-emitting diodes (LEDs) at the back of Matrox
GatorEye should be lit.
The LEDs on your Matrox GatorEye are:
• Power LED. This LED shows the power and ready status of your Matrox
GatorEye.
LED
Description
Off
Your Matrox GatorEye has no power.
Solid red
Your Matrox GatorEye has encountered an error. Unplug and then replug your Matrox
GatorEye from its power source. If the problem persists, contact Matrox technical
suppor t.
Blinking orange
Your Matrox GatorEye is acquiring an IP address while in minimal mode. Please wait.
Solid orange
Your Matrox GatorEye has booted in minimal mode. Contact Matrox technical support
for further guidance.
Blinking green
Your Matrox GatorEye is acquiring an IP address. Please wait.
Solid green
Your Matrox GatorEye is ready.
s
Advertisement
Table of Contents
