Additional Features - Matrox GatorEye Series Installation And Technical Reference

44 Chapter 4: Matrox GatorEye feature reference
Feature name
LineDebounce

Additional features

Matrox GatorEye supports the following GenICam-extension features. The
definition for the GenICam-standard features can be found in the GenICam
Standard Feature Naming Convention.
Digital I/O control
The digital I/O control features relate to the control and monitoring of the
camera's auxiliary input and output lines and the Matrox GatorEye dedicated
trigger line.
This subsection lists only the Matrox GatorEye GenICam-extension features. For
a complete list of the digital I/O control GenICam-standard features, refer to the
GenICam Standard Feature Naming Convention.
Unless otherwise specified, the data type of the following feature values is integer.
Description
Feature value
Returns or sets the minimum amount of time following a signal transition, during which any new signal
transitions are ignored. After the LineDebounce period, if the signal is in the same state as previously
recorded, the signal transition is accepted.
Debounce250ns
μ
Debounce1 s
μ
Debounce5 s
μ
Debounce10 s
Debounce1ms
Debounce10ms
Debounce25ms
Description
The duration must be greater than or equal to 250 nsecs.
This is the default value.
The duration must be greater than or equal to 1
The duration must be greater than or equal to 5
The duration must be greater than or equal to 10
The duration must be greater than or equal to 1 msec.
The duration must be greater than or equal to 10 msecs.
The duration must be greater than or equal to 25 msecs.
μ
sec.
μ
secs.
μ
secs.