Table of Contents
Advertisement
94 Appendix F: Connection modules
Wire terminal of
Pin number of
VIP-3/SC/D25
Matrox GatorEye
SUB/F VARIOFACE
digital I/O and
module
power cable
connector (DB-25)
5
5
6
6
7
7
10
10
11
11
12
12
13
13
14
14
15
15
16
16
Matrox GatorEye
line name
Line2+
Line1+
LinTrig+
TxD_RS232
Line6
Line4
Line3+
Line0+
LinTrig-
GND
Description
Opto-isolated auxiliary line 2 (input), positive.
Suppor ted signals: User-defined (input), counter event source,
trigger, or quadrature input bit A or B.
Note: The negative component of this line is internally connected to
the ground.
Opto-isolated auxiliary line 1 (input), positive.
Suppor ted signals: User-defined (input), counter event source,
trigger, or quadrature input bit A or B.
Note: The negative component of this line is internally connected to
the ground.
Opto-isolated trigger input line, positive.
RS-232 transmit.
Open-collector auxiliary line 6 (output).
Suppor ted signals: acquisition active, frame active, frame trigger
wait, auxiliary input or dedicated trigger redirect, timer active (can
be used as a standard strobe), counter active, exposure active,
user-defined (output).
Open-collector auxiliary line 4 (output).
Suppor ted signals: acquisition active, frame active, frame trigger
wait, auxiliary input or dedicated trigger redirect, timer active (can
be used as a standard strobe), counter active, exposure active,
user-defined (output).
Opto-isolated auxiliary line 3 (input), positive.
Suppor ted signals: User-defined (input), trigger, counter event
source, or quadrature input bit A or B.
Note: The negative component of this line is internally connected to
the ground.
Opto-isolated auxiliary line 0 (input), positive.
Suppor ted signals: User-defined (input), trigger, counter event
source, or quadrature input bit A or B.
Note: The negative component of this line is internally connected to
the ground.
Opto-isolated trigger input line, negative.
Note that, when connected to the Matrox Breakout Box, this pin
must be connected to ground.
Ground. This ground is reserved for use with the ground from your
power supply.
Advertisement
Table of Contents
