Table of Contents
Advertisement
• 100/1G LED. This LED shows the network connection status of your Matrox
GatorEye.
LED
Description
Off
There is either no network link or a low speed (10 Mbits) connection between your
Matrox GatorEye and the network.
Solid yellow
There is a link using the 100 Mbits/sec connection.
Blinking yellow
The 100 Mbits/sec connection has activity.
Solid green
There is a link using the 1000 Mbits/sec (1 Gbit/sec) connection.
Blinking green
The 1 Gbit/sec connection has activity.
• Status LED. This LED shows the general activity of your Matrox GatorEye.
LED
Description
Off
Your Matrox GatorEye has no power.
Solid orange
Your Matrox GatorEye is in idle mode.
Solid red
Your Matrox GatorEye has encountered an error and cannot boot. If the problem
persists, contact Matrox technical support.
Blinking orange-red
Your Matrox GatorEye has encountered a serious hardware-error. Please call Matrox
technical support.
Green
Your Matrox GatorEye is grabbing an image.
• User LED. This LED is configured using Matrox Intellicam's feature browser, or
using the MIL MdigControlFeature() function. By default, this LED is never lit.
To change the status of this LED, refer to Chapter 4: Matrox GatorEye feature
reference.
Reading the state of your Matrox GatorEye
25
Advertisement
Table of Contents
