Joystick Calibration Procedure - Ametek BROOKFIELD HPQA Series Operation Instructions Manual

If lower mechanical stop is preventing your spindles from reaching proper immersion depth, the stop
limiting bolt can be removed with a 7/64" hex key wrench. This will allow the lower stop to be moved
down and allow additional downward travel. Please be careful to prevent driving spindles into bench top
or the bottom of your sample containers.

3.4 Joystick Calibration Procedure

1. From the main screen of HPQA, click on Setting icon which navigates to the Settings screen.
2. Click on "Joystick Calibration" icon, navigates to Joystick Calibration screen
3. Press "Play" button to start the calibration of Joystick
4. Upon clicking the "Play" button, upper directional arrow highlights in the green color, which
indicates to move the joystick in upward direction and hold until color changes back to grey and
central part of the joystick icon turns green
M-HPQA-001 H E L I PAT H Q U I C K A C T I O N L A B O R AT O R Y S TA N D - O P E R AT I O N A L M A N U A L 23