Carrying Out The Measurement; Preparing The Measuring Procedure - Ametek Spectro MIDEX Original Operating Instructions

5.5

Carrying out the measurement

Warning! Risk of injury due to crushing!
When closing the sample chamber lid, there is an inherent risk of crushing injuries.

When closing the sample chamber lid keep the fingers out of the sample
chamber.
Warning! Risk of injury due to laser radiation!
The instrument uses a laser pointer of protection class I. Your eyes will suffer
damage if you look at this laser pointer for an extended period of time.

Therefore never look directly at the laser pointer.
5.5.1

Preparing the measuring procedure

To perform a measurement, proceed as follows:
1. Place the sample on the scissor
lift table and move it below the
measurement window.
2. Switch on the light (1) and the
laser (2) with the respective
buttons on the video screen.
SPECTRO MIDEX — 05.10.2017
Fig. 5
Fig. 6
Operation
— 21