Firmware Update - Ametek BROOKFIELD HPQA Series Operation Instructions Manual

5. Release the joystick until the downward arrow turns green. Hold the joystick in the downward
direction until color changes back to grey and central part of the calibration icon highlights in the
green color
successful completion of the Joystick Calibration, pop-up appears with "check" mark along with
back arrow button

3.5 Firmware Update

1. Press the Settings Icon, then press the download icon to navigate to firmware upgrade screen
2. It will display the current firmware version
3. Insert the USB with latest firmware into the HPQA USB A slot on the rear panel. USB drive must
contain only one firmware file
4. Press download icon in the screen
5. It will download the latest version in the USB
6. If no USB is detected, it will display error message "NO USB detected" with animation
7. After completion of download it will reboot the system and it will display the
following colors for firmware update
» Blue
» Green
» Yellow
» Orange
» Red
» Brown
M-HPQA-001
- Read firmware image file
- Erase internal flash image area
- Write internal flash image area
- Erase external flash image area
- Write image partition to external flash
- Erase downloaded image.
H E L I PAT H Q U I C K A C T I O N L A B O R AT O R Y S TA N D - O P E R AT I O N A L M A N U A L
Upon
24