Ametek BROOKFIELD HPQA Series Operation Instructions Manual page 20

5. Use the Joystick to raise the Helipath head and spindle to the desired starting test position
6. Start the desired test on your Viscometer/Rheometer
7. Press the Play/Pause button
on the right side of the screen confirming the HPQA direction of travel
8. When the HPQA reaches the Lower Limit Stop, the reverse switch will automatically
activate and the HPQA will start ascending. The Arrow Icon will change to reflect the new
direction of travel
M-HPQA-001 H E L I PAT H Q U I C K A C T I O N L A B O R AT O R Y S TA N D - O P E R AT I O N A L M A N U A L
to start the HPQA descent. An Arrow Icon will appear
20