Product Registration; Helipath Test Run - Ametek BROOKFIELD HPQA Series Operation Instructions Manual

• Turn on the HPQA by using the power switch on the rear of the instrument
• Perform the Homing procedure as described in section 2.2. Do not autozero or run a test
on the viscometer while the HPQA is Homing

3.1.3 Product Registration

Press the Settings Icon, then press the Scan Icon to open the QR code to register your product and receive information
on how to download the operating instructions.

3.2 Helipath Test Run

1. The Joystick control can be used to lower or raise the Helipath manually
M-HPQA-001
Ensure faster support by registering your instrument. Scan the QR code or visit:
www.brookfieldengineering.com/contactus/register-product
H E L I PAT H Q U I C K A C T I O N L A B O R AT O R Y S TA N D - O P E R AT I O N A L M A N U A L 18