Components; Utilities - Ametek BROOKFIELD HPQA Series Operation Instructions Manual

1.1 Components

Components
HPQA Head and Upright Rod Assembly w/ ¼-20 Bolt
Model G Laboratory Stand Base
T-Bar Spindles Set of Six (#91 - #96) w/Case
Power Cord
Power Supply
† "M" in the part number identifies magnetic spindles.
Please check to be sure that you have received all components and that there is no damage. If you are missing any parts,
please notify AMETEK Brookfield or your local authorized dealer immediately. Any shipping damage must be reported to
the carrier. Please save packaging materials in case the device needs to be shipped for service.

1.2 Utilities

VAC; Hz Limits: 100 - 240 VAC; 50/60 Hz ±5%
Power Supply (AMETEK Brookfield P/N HP-2010): 24VDC 60 Watts, Class II certified plug-in power supply,
Overvoltage Category II
Main supply voltage fluctuations are not to exceed 10% of the nominal supply voltage.
Must be used with HP-2010 Power Supply. Alternative power sources may cause damage to the instrument.
M-HPQA-001 H E L I PAT H Q U I C K A C T I O N L A B O R AT O R Y S TA N D - O P E R AT I O N A L M A N U A L
Part Number
N/A
GV-1201
SST or SSTM†
Varies
HP-2010
Quantity
1
1
1
1
1
6